Robo Acotec Walls are high-performance M25 grade concrete used for the construction of partition walls, interior walls, and facades. These walls are manufactured using advanced Acotec technology using Elematic machine imported from Finland. They offer superior strength, durability, and speed in construction.
Robo Acotec Walls require minimal The surfaces are easy to clean, and these walls do not need frequent repairs. A simple hand grinder can be used instead of hammering.
Yes, Robo Acotec Walls can be finished with various coatings, including paints, textures, or tiling, depending on the desired aesthetic needs of Architect, Developer or Client. These make Robo Acotec Walls versatile for both functional and decorative purposes.
Yes, Robo Acotec Walls are well-suited for high-rise buildings, especially for internal partitions and facades. Their lightweight nature reduces the load and
increases the carpet area for developers. They provide quick installation, making them an ideal choice for large-scale projects.
Yes, Robo Acotec Walls are manufactured to meet various industry standards and certifications for safety, fire resistance, and durability. They are evaluated in accordance with national and international standards.
The hollow cores in Robo Acotec Walls allow for easy installation of MEP services – electrical and plumbing lines can be routed through the walls without the need for hammering or chiselling. For horizontal electrical conduits or plumbing lines, these walls can be cut up to 60% of its thickness.
Robo Acotec Walls are specifically designed to offer flexibility for MEP integration:
Robo Acotec Walls are suitable for a wide range of applications. With a water absorption rate of approximately 4.5% (compared to the average 10-15% for conventional brickwork), Robo Acotec Walls have a low moisture absorption rate, making them ideal for wet areas. They offer excellent resistance to water damage, Mold, and mildew, making them perfect for environments with high humidity or water exposure. Ideal applications include:
Robo Acotec Walls are made from M25 grade concrete with zero slump, offering low moisture absorption and enhanced sound insulation. These walls are exceptionally durable, with compressive strength of 30 N/mm², depending on the wall thickness, significantly outperforming traditional brickwork.
No, you cannot hammer a nail, but bolts can be drilled into the walls.
Robo Acotec Walls are crack-resistant due to their extremely low drying shrinkage ratio. Additionally, a Fiber mesh tape is applied at the vertical joints between walls, preventing any future crack formation.
Robo Acotec Walls come with a smooth factory finish and does not require plastering. However, a coat of coarse putty and a coat of fine putty is recommended for a smoother finish before application of paint.
Tiles can be fixed on these walls just like in conventional brickwork.
The anchor pull-out strength and shear capacity of an anchor bolt installed in Robo Acotec Walls is 5 KN, making it suitable for supporting heavy appliances.
